4 Problems That Call For An Excavating Company's Help
Posted on: 25 October 2021
Digging a hole doesn't sound like such a challenging task, especially if you have the experience and equipment to handle contracting work. However, there comes a point when the smart move is to bring in a team of professionals. Let's look at four problems that call for the help of an excavating company.
Trenching
Many construction projects require significant trench work. You may need to dig a trench to lay pipes or cables, for example. When you're installing a trench, you often have critical requirements. Folks in cold regions need to have water and sewer lines below the level of the hardest recorded frost. An excavating contractor company can assure you the trench for your project will achieve consistent depths and other dimensions.
Foundations
Digging holes for foundations is one of the most common jobs in the excavating industry. Precise dimensions are critical to a project's success.
What makes excavation for foundations potentially more challenging is they tend to run fairly deep. This is especially the case if you need to excavate spaces for piers. Foundation work often runs into bedrock, coal seams, and other challenging layers. It's best to have someone on the job who knows how to cope with these problems as they appear.
Dewatering
The simplest way to control water at a construction site is often to give it somewhere specific to go. An excavating company can dig wells and trenches to direct water away from structures. This is often an effective civil engineering solution when you're dealing with ground that's highly saturated.
Once you've dewatered an area, you can usually use the trenches as the basis for a more permanent solution, too. Drains and culverts usually require excavation. With a little planning, you can make your dewatering and drainage efforts work together.
Leveling
People tend to think of excavation as getting into the ground. However, sometimes it's about just making the ground more level. If you have a location with lots of tiny hills on it, for example, the best option may be to level the hills. You'll excavate the materials from the hills to turn the area into flat land.
A bonus on this sort of job is you can often reuse the excavated materials. You might have some depressions in the nearby ground, and the excavated soil can fill them in. Not only does this make the site leveler, but it might also reduce expected costs from moving materials off-site.
Share