The Home Renovation Guide To Using Stamped Metal Shingles To Replace Asphalt Roofing

Posted on: 30 July 2020

If you need to replace asphalt shingles, stamped metal roofing can be a great choice for the materials you use for the renovation project. The stamped materials can be shingle-like roofing that is installed, much like the asphalt shingles that you have removed. The following stamped metal roofing guide will help you with replacing shingles with these metal alternatives:

  • Removing Asphalt Shingles and Repairing Decking—Before the stamped metal roofing can be installed, the old asphalt shingles will need to be removed. Once the shingles are removed, problems with water damage and rot need to be repaired. In addition, you want to make sure that all of the roof decking materials are even and repair uneven areas or pieces of decking that stick up and can cause damage to the new metal roofing materials you are planning on having installed on your home.
  • Improvements and Reinforcement for Metal Shingles—The new stamped metal shingles are unique roofing materials that can have problems in areas where there is flashing and changes in roof slopes. Therefore, these vulnerable areas may need to have additional improvements like a rubber membrane reinforcement to help stop leaks that can cause serious problems with water damage. Use the rubber membrane anywhere there could be a problem with leaks developing after the new roofing materials are installed.
  • Underlayments Moisture Barriers for Stamped Metal Roofing—Underlayment materials that you use with stamped metal shingles are also important. You want to use a more durable underlayment that will be resistant to moisture and problems with leaks. Today, there are rubber membranes and synthetic moisture barriers that can be used instead of asphalt felt paper.
  • Choosing the Type Of Stamped Metal Shingles to Use for Renovations—Today, there are many stamped metal shingle options to have installed on your roof. These can be metal shingles that look like tiles, shakes, or decorative shingle materials. You will want to choose the type of stamped metal shingle that best matches the architectural design of your home. If you are doing a historic renovation, the decorative shingles can be a great choice for your new roof.

Stamped metal roofing can be a great choice of materials to replace old shingles, but there are some improvements that you will want to make sure get done too. If you are ready to replace asphalt shingles with stamped metal products, contact a roofing service to start planning these renovations for your home.